1. Hobbies

The "Tallerays"

Dipole line array speakers
Read More
  • The "Tallerays" are so named because they're taller than almost any other speaker I know of. Each speaker, standing 7'4" tall by 16" wide by 2.5" deep, includes 14 Foster 5.25" midwoofers and a single centrally positioned Eminence compression driver mounted to a Dayton waveguide. Impedance is seven ohms and sensitivity is about 96dB. The midwoofers' top end is attenuated by a single 0.5mH inductor. They cross over to the tweeter via a second order crossover. The bass response rolls off below 70hz, so a subwoofer is recommended to reinforce the lower octaves.

    The "Tallerays" are so named because they're taller than almost any other speaker I know of. Each speaker, standing 7'4" tall by 16" wide by 2.5" deep, includes 14 Foster 5.25" midwoofers and a single centrally positioned Eminence compression driver mounted to a Dayton waveguide. Impedance is seven ohms and sensitivity is about 96dB. The midwoofers' top end is attenuated by a single 0.5mH inductor. They cross over to the tweeter via a second order crossover. The bass response rolls off below 70hz, so a subwoofer is recommended to reinforce the lower octaves.

  • A close up view of the Dayton waveguide tweeter and one midwoofer also shows the attractive grain pattern of the Baltic birch veneered baffle. The baffle is finished with two coats of tung oil, and the side rails are painted satin black.

    A close up view of the Dayton waveguide tweeter and one midwoofer also shows the attractive grain pattern of the Baltic birch veneered baffle. The baffle is finished with two coats of tung oil, and the side rails are painted satin black.

  • Backside of the baffle. The tweeter is an Eminence ASD-1001 compression driver.

    Backside of the baffle. The tweeter is an Eminence ASD-1001 compression driver.

  • Closer view of the tweeter crossover and terminals. The driver cutouts are chamfered on the inside for a free airflow. Wiring is "very high end" 18 ga OFC Royal Cable from the Wal Mart auto departmentl.

    Closer view of the tweeter crossover and terminals. The driver cutouts are chamfered on the inside for a free airflow. Wiring is "very high end" 18 ga OFC Royal Cable from the Wal Mart auto departmentl.

  • Profile view of the 2-1/2" deep speaker. The speaker is attached to the two feet with large shelf brackets from Home Depot.

    Profile view of the 2-1/2" deep speaker. The speaker is attached to the two feet with large shelf brackets from Home Depot.

  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2021 SmugMug, Inc.